Showing 49–64 of 67 results
-
M9-OPUS-DRDLVIn-Fixture Lighting Node (DRDLV)
The Mx-OPUS-DRDLV provides for bi-directional, fixture level wireless DALI (digital addressable lighting interface) lighting control integration.
-
M9-OPUS-ML10VHB (high bay)In-Fixture Lighting Node (ML10VHB)
Connecting the device to 0-10V dim-to-off drivers, enables any lighting manufacturer to deliver simple, fully connected fixtures. The small, sleek form factor includes a PIR / Lux sensor.
-
M9-OPUS-MLDE (highbay)In-Fixture Lighting Node (MLDE)
Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
-
M9-OPUS-MLDHB
In-Fixture Lighting Node (MLDHB)
Connecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
-
M9-RECPWireless Receptacle Controlled Outlet
The Wireless Receptacle Outlet provides a simple solution to meet energy codes without requiring complex changes to a facility. The controller can retrofit your existing duplex receptacles simply and quickly, without the need for new wiring. The controller offers a duplex receptacle with a 15-amp relay-switched outlet and a 15-amp constant-power outlet.
-
M9-EPSMPlug-In Switch Module
The Magnum plug-in switch module provides an easy way to save energy and control lighting and appliance loads based on room occupancy.
-
M9-OPUS-HBKO10VLighting Node (HBKO10V)
When the device is connected to 0-10V dim-to-off drivers, it enables any lighting manufacturer to deliver simple, fully connected fixtures.
-
M9-OPUS-HBKOD
Lighting Node (HBKOD)
In fixture DALI lighting controller with digital PIR and ambient light sensing for daylight harvesting applications as well as occupancy detection.
-
M9-OPUS-PWMLVPWM LED Dimming Module
The Magnum Energy Solution’s PWM LED Dimming Control Module, through the use of thousands of PWM dimming steps, creates what is perceived by the natural eye as a single continuous dim, even at extremely low light levels.
-
M9-OPUS-HPML (high bay)Wired Motion / Lux Sensor (HPML)
Wired motion / lux sensor that works in tandem with Magnum’s OPUS-DRD, DR10V, DRDHV and DRDLV to add additional control to your fixture.
-
M9-USR-RPTSmart Repeater
Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.
-
M9-OPUS-MLD (low bay)In-Fixture Lighting Node (MLD)
Read moreConnecting the device to a Philips Xitanium SR Driver or a DALI driver, enables any lighting manufacturer to deliver fully connected fixtures. The small form factor includes a PIR / Lux sensor.
-
M9-OPUS-DR10V
In-Fixture Lighting Node (DR10V)
Compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-36 VDC, 12-24 VAC source near the fixture level.
-
M9-OPUS-10V12-2
2-Channel In-Fixture Lighting Node (10V12-2)
The Mx-OPUS-10V12-2 (2 channels) is compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-15VDC source.
-
M9-RTS1Remote Temp Sensor
Single channel solar-powered sensor, with an intelligent transmission management, are used to measure the room temperature and transmit this information wirelessly.
-
M9-RSB-12 (12 channel)Sensor Control Board (12)
The Magnum Temperature / Humidity / Pressure Sensor Control Board includes 2 digital inputs, 3 digital outputs and 1 analog output.