Wireless LAN Access Point with ETHERNET interface for use with EnOcean 868 MHz or 902 MHz wireless devices and the MES Venergy UI software.
Wireless LAN Access Point with ETHERNET interface for use with EnOcean 868 MHz or 902 MHz wireless devices and the MES Venergy UI software.
| Part Numbers (Frequency Dependent) | M9-AP3 (902 MHz – North America)
M8-AP3 (868 MHz – Europe and China) |
| Processor | AM3358 1GHz ARM® Cortex-A8 Processor |
| Onboard Flash | 4GB |
| Accelerator | NEON Floating-Point |
| Microcontroller | 2x RU 32-bit |
| RAM | 1 GB |
| Cache | 256KB |
| Dimensions | Length: 5.10” (129.54 mm)
Width: 5.05” (128.27 mm) Height: 1.24” (31.496 mm) |
M9-USBThe Magnum USB stick enabled with a radio module for over-the-air configuration or a Magnum eBox (Mx-EBOX) for configuration over Ethernet / WIFI.
M9-USR-RPTWireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.
M9-EBOX3.0-WiFiThe EBOX 3.0-WiFi integrates EnOcean wireless solutions to wired building automation systems that utilize the BACnet building automation protocol. (WiFi Capability)
Reviews
There are no reviews yet.